Total elapse time to this point: 8 hours
as you can see, there are multiple images of my model in this photo, showing each individual pice I assembled. Viewing starts at the top left and works from left to right, top to bottom. To give you an idea on how small the first two pices are, the cockpit is no larger than my thumbnail. That clearly shows why the cockpit took such time in assembling. The whole assembly process this time around was difficult even though it was relitively simple. In the wing assembly when I installed the engine mount, I mistook where the pice should be glued and did not see the error untill I attempted to install the landing gear behind it. I nearly broke the pice of trying to reset it as the glue was almost entirely set. I misjudged some other smaller assembly segments, and misplaced a tiny clear pice. I was able to counter this by covering over the hole in the wing with a plastic pice and putting some contour puddy over the hole. Not the best solution but it worked.
Comments